Guide
5 Best Rough Country Lift Kits for Trucks & Jeeps
Best Rough Country lift kits verified on Amazon: Colorado 6in, Titan 3in, 4Runner 3in and classic Jeep XJ/TJ kits — brand, SKU and fitment triple-checked.
The short answer: Rough Country is the value brand of the lift world — application-tuned springs or spacers, N3 dampers and the geometry brackets in the box, at the lowest price in each segment. The verified five spread across the platforms its Amazon catalogue serves best without repeating kits already published in our vehicle guides: a full 6-inch suspension lift for the Colorado / Canyon (top pick), a 3-inch bolt-on kit for the Nissan Titan, a 3-inch kit for the third-gen 4Runner, and two classic-Jeep kits — XJ Cherokee and TJ Wrangler — done the complete way. Every pick was triple-matched by brand, part number and fitment against a checked Amazon listing with a verified image on 2026-11-15 — see how we test and verify. We print no prices; the listing shows today’s. If you are shopping by vehicle rather than by brand, start from the Colorado leveling kits or the shocks for lifted trucks guide instead.
Quick Comparison Table
| Image | Product | Key Feature | Buy Now |
|---|---|---|---|
![]() | Rough Country Rough Country 6" Lift Kit w/N3 Struts for 2015-2022 Chevy Colorado / GMC Canyon - 24133★ Best Overall | Full 6in suspension lift with loaded N3 struts for GM's midsize trucks. | Check Price |
![]() | Rough Country Rough Country 3" Lift Kit w/N3 Shocks for 2004-2024 Nissan Titan - 83430★ Best Budget | 3in bolt-on lift with forged aluminum control arms for the standard Titan. | Check Price |
![]() | Rough Country Rough Country 3" Lift Kit for 1984-2001 Jeep Cherokee XJ 2WD/4WD - 630XN2★ Best for Jeep Cherokee XJ | 3in lift with full replacement rear leaf springs for the 1984–2001 XJ. | Check Price |
![]() | Rough Country Rough Country 4" Lift Kit w/N3 Shocks for 2003-2006 Jeep Wrangler TJ 4WD - 90730★ Best for Jeep Wrangler TJ | 4in lift with tuned coils and a transfer case drop for the 2003–2006 TJ. | Check Price |
![]() | Rough Country Rough Country 3" Lift Kit w/N3 Struts for 1996-2002 Toyota 4Runner - 77131★ Best for Toyota 4Runner | 3in bolt-on lift with loaded N3 struts for the 1996–2002 4Runner. | Check Price |
Detailed Product Reviews
Check Price on AmazonLast checked November 15, 2026
Key specs
- Fitment: Chevrolet Colorado / GMC Canyon 2015–2022, 2WD and 4WD, gas and diesel — does NOT fit ZR2 or Trail Boss
- Lift: 6in front / 4.5in rear via lifted cast knuckles, front and rear crossmembers and a full skid plate setup
- Dampers: N3 loaded struts and N3 rear shocks — no strut disassembly, no welding
- Tires: developed for 285/65R18 (about 33in) on 18x9 aftermarket wheels — factory wheels will NOT work
- Type: suspension lift
- SKU: 24133
Why we recommend it
Most Rough Country kits are spacer-and-block packages; this one is a real suspension lift, and it shows in the parts list: one-piece cast knuckles, both crossmembers, skid plates and loaded struts that keep the geometry honest at six inches. It is the strongest all-round buy in the brand's catalogue for a current truck. The conditions are printed, not hidden: ZR2 and Trail Boss are excluded because they already sit lifted from the factory, aftermarket wheels are mandatory, and the install involves minor cutting and drilling. One retailer advertises a 35-inch max tire for this kit; Rough Country's own specification is 285/65R18, and the manufacturer's figure is the one to follow.
From the Amazon listing
- 6-inch front / 4.5-inch rear lift for 2015-2022 Colorado and Canyon, gas and diesel
- Lifted one-piece cast knuckles and front/rear crossmembers maintain OEM geometry
- Full skid plate setup included
Best for: Colorado and Canyon owners who want a full 6-inch lift in one box
Pros
- ✓ Complete knuckle-and-crossmember lift
- ✓ Loaded struts — no spring compressor
- ✓ Skid plates included
Cons
- ✗ ZR2 and Trail Boss excluded
- ✗ Aftermarket wheels required
- ✗ Minor cutting and drilling
Check Price on AmazonLast checked November 15, 2026
Key specs
- Fitment: Nissan Titan 2004–2015 and 2017–2024, 2WD and 4WD — standard Titan only, NOT XD or PRO-4X
- Lift: 3in bolt-on — no cutting or drilling required
- Contents: forged aluminum upper control arms, strut spacers, rear lift blocks, U-bolts, extended sway-bar links
- Dampers: (2) Premium N3 rear shocks; supports up to 33-inch tires
- Type: suspension lift
- SKU: 83430
Why we recommend it
The Titan is the forgotten full-size in most lift catalogues, and this is the value pick of the guide: three inches of bolt-on lift with forged aluminum upper control arms in the box, which is the part budget kits usually skip and the part that keeps ball-joint angles sane at this height. The exclusions decide whether it fits your truck at all: the Titan XD is a different, heavier platform and is out, and the PRO-4X is out because it already carries a factory lift. One dealer page claims XD fitment for this SKU — Rough Country's own notes exclude the XD, and the manufacturer wins that argument every time.
From the Amazon listing
- 3-inch bolt-on lift — no cutting or drilling required
- Forged aluminum upper control arms included
- Strut spacers, rear lift blocks, U-bolts and extended sway-bar links
Best for: Standard Titan owners lifting on a budget
Pros
- ✓ Forged aluminum control arms included
- ✓ True bolt-on install
- ✓ Two decades of model years covered
Cons
- ✗ XD and PRO-4X excluded
- ✗ Strut version not for 2WD
- ✗ Rear shocks only — front stays spacer-based
Check Price on AmazonLast checked November 15, 2026
Key specs
- Fitment: Jeep Cherokee XJ 1984–2001 4WD and 1985–2001 RWD, per the Amazon listing
- Lift: 3in with full replacement rear leaf springs — no add-a-leafs or blocks
- Contents: lifted front coil springs, tubular lower control arms, sway-bar brackets, U-bolts and hardware
- Dampers: (4) Premium N3 shocks; clears up to 31-inch tires
- Type: suspension lift
- SKU: 630XN2
Why we recommend it
The honest way to lift an XJ is to replace its tired rear leaf packs, not stack an add-a-leaf into springs that have been sagging since the last century — and that is exactly what the Series II does. Full replacement rear leafs, lifted front coils, tubular lower arms and four N3 shocks make this the most complete classic-Jeep kit in the guide for the money. No fitment exclusions are published for this SKU, which is rare in this catalogue. The one job to do before ordering is an inspection: on a high-mileage XJ, worn shackles and spring hardware should be budgeted alongside the kit, because the new packs will expose every worn bushing around them.
From the Amazon listing
- 3-inch lift with full replacement rear leaf springs — no add-a-leafs or blocks
- Lifted front coil springs and tubular lower control arms
- (4) Premium N3 shocks included
Best for: XJ owners who want the rear done properly, not patched
Pros
- ✓ Full replacement rear leaf springs
- ✓ Four N3 shocks included
- ✓ No published exclusions
Cons
- ✗ Aging XJ hardware may need replacing too
- ✗ 31-inch tire ceiling
- ✗ Leaf-spring install is the long way round
Check Price on AmazonLast checked November 15, 2026
Key specs
- Fitment: Jeep Wrangler TJ 2003–2006 4WD and Wrangler Unlimited (LJ) 2004–2006 — the 1997–2002 TJ uses kit 90630 instead
- Lift: 4in with application-tuned coil springs based on OEM spring rates
- Contents: tubular lower control arms with Clevite rubber bushings, solid tubular transfer case drop kit, track bar drop bracket, extended sway-bar links front and rear
- Dampers: (4) Premium N3 shocks; developed for 33x12.50 tires; 6–8 hour install
- Type: suspension lift
- SKU: 90730
Why we recommend it
Four inches on a short-wheelbase TJ is where driveline angles stop being theoretical, and this kit's parts list shows Rough Country knows it: a transfer case drop and track bar drop bracket are in the box, not on an options sheet. The tuned coils are based on OEM spring rates, so the Jeep rides like a Jeep, just taller. The follow-on cost is stated plainly on the card: automatic-transmission models may need a slip yoke eliminator and CV driveshaft to cure vibrations, and adjustable lower arms may be required — budget for the possibility before the install, not after the test drive. Check your year twice: 1997–2002 TJs take a different kit.
From the Amazon listing
- 4-inch lift with application-tuned coil springs based on OEM spring rates
- Tubular lower control arms with Clevite rubber bushings
- Solid tubular transfer case drop kit and track bar drop bracket
Best for: TJ and LJ owners lifting to 33s the complete way
Pros
- ✓ Transfer case drop included
- ✓ Coils tuned to OEM rates
- ✓ Track bar bracket in the box
Cons
- ✗ SYE/CV driveshaft may be needed
- ✗ 2003–2006 only
- ✗ Long install — 6 to 8 hours
Check Price on AmazonLast checked November 15, 2026
Key specs
- Fitment: Toyota 4Runner 1996–2002, 2WD and 4WD
- Lift: 3in, bolt-on installation (2–4 hours); levels the front with the rear
- Contents: loaded N3 lifted struts — no spring compressor or strut disassembly — plus rear coil springs
- Dampers: (2) Premium N3 rear shocks; clears up to 31x10.50 tires
- Type: suspension lift
- SKU: 77131
Why we recommend it
The third-generation 4Runner is the Toyota this brand serves best on Amazon: a three-inch bolt-on kit whose front end arrives as loaded struts, so there is no spring compressor work and no strut disassembly on the driveway. Rear coils and N3 shocks complete the stance, and the front sits level with the rear rather than nose-high. One manufacturer note matters at ordering: the replacement front strut option is not for use on 4Runners equipped with factory Bilstein front struts. One retailer also lists a conflicting UPC for this SKU; the Amazon listing's UPC is the one recorded with this pick. For the modern 4Runner, the leveling options live in a different part of the catalogue — this kit is for the 1996–2002 trucks.
From the Amazon listing
- 3-inch lift; bolt-on installation (2-4 hours)
- Loaded N3 lifted struts — no spring compressor or strut disassembly needed
- Rear coil springs and (2) Premium N3 shocks
Best for: Third-gen 4Runner owners who want a driveway-friendly 3 inches
Pros
- ✓ Loaded struts — no compressor needed
- ✓ Quick 2–4 hour bolt-on install
- ✓ Levels front to rear
Cons
- ✗ Not for factory Bilstein strut trucks
- ✗ 1996–2002 trucks only
- ✗ 31-inch tire ceiling
Buying Guide: How to Choose a Rough Country Kit
The formula, and its honest limits
Every kit here runs the same formula: springs or spacers tuned to the application, N3 gas dampers valved for the vehicle, and the brackets needed to keep geometry honest. The N3 is a budget twin-tube damper — adequate, not premium — and the brand’s hard parts carry a lifetime replacement warranty. Judge these kits as the value option they are, and they make sense; expect Fox or King ride quality and they will not.
The SKU trap is the real buying skill
Near-identical Rough Country kits split by model-year breaks (TJ 90630 for 1997–2002 vs 90730 for 2003–2006), by engine, and by factory-lift trims (Colorado ZR2 / Trail Boss, Titan XD / PRO-4X). Ordering the wrong sibling is the most common failure with this brand, which is why every card leads with its fitment and exclusion lines. Shock options also change the SKU — N3, V2 and M1 variants are different boxes — so match the listing’s shock series to the card before ordering.
Follow-on costs live outside the box
Two of these five kits name costs beyond the kit itself: the Colorado lift requires aftermarket wheels (factory wheels will not work), and the TJ lift may require a slip yoke eliminator and CV driveshaft on automatic models. Neither is a defect — both are printed on the cards so the budget is honest before the install starts. An alignment after any lift is a given; the alignment kits guide covers the correction hardware if your angles will not come back into spec.
What we left out, and why
- Rough Country 36420 (Ram 2500 5in, gas) — the strongest near-miss: kit, fitment, contents and the Amazon image all verified across dealer pages and mirrors, but no fetched source exposed its Amazon ASIN, so it fails the listing-evidence gate. First in line if the ASIN is ever recovered.
- Rough Country’s Ford and Ram half-ton kits — verified products, but already published as picks in this site’s vehicle guides; this guide does not duplicate a kit that already has a card elsewhere on the site.
- Non-N3 variants (V2 / M1 shock versions) — same platforms under different SKUs; the N3 versions are the ones whose Amazon listings and images verified cleanly in this pass.
🏆 Our Top Recommendation
Rough Country 6in Lift Kit w/N3 Struts (24133) — Colorado / Canyon
The most complete kit in this guide: a full 6-inch suspension lift with cast knuckles, crossmembers, skid plates and loaded N3 struts for the 2015–2022 Colorado and Canyon — the platform Rough Country's bigger kits suit best.
Most Rough Country kits are spacer-and-block packages; this one is a real suspension lift, and it shows in the parts list: one-piece cast knuckles, both crossmembers, skid plates and loaded struts that keep the geometry honest at six inches. It is the strongest all-round buy in the brand's catalogue for a current truck. The conditions are printed, not hidden: ZR2 and Trail Boss are excluded because they already sit lifted from the factory, aftermarket wheels are mandatory, and the install involves minor cutting and drilling. One retailer advertises a 35-inch max tire for this kit; Rough Country's own specification is 285/65R18, and the manufacturer's figure is the one to follow.
Best for: Colorado and Canyon owners who want a full 6-inch lift in one box
Final Thoughts
Buy Rough Country with your eyes open and it is the easiest value call in the catalogue: the Colorado kit if you want a real six-inch suspension lift in one box, the Titan kit if your truck is the one other brands forget, the 4Runner kit for a driveway-friendly three inches, and the two Jeep kits if your project is a classic. Read the exclusion line first, match the SKU to your year break, and let the manufacturer — never the retailer — settle any argument about fitment or tire size. Brand loyalty aside, the upper control arms guide is the companion read for any 3-inch-plus lift, factory arms being the first thing lift height runs out of.
Frequently asked questions
Are Rough Country lift kits good quality?
They are the value end of the market and this guide treats them that way: application-tuned springs or spacers, N3 twin-tube dampers and the brackets needed to keep geometry honest, at the lowest price point in each segment, with a lifetime replacement warranty on the hard parts. They are not premium dampers. Results depend heavily on install quality and a post-install alignment, and several kits push follow-on costs (wheels, a possible SYE on the TJ) onto the buyer — those are printed on each card.
Why is there no Ford or Ram kit in this guide?
Because of this site's verification rule, not because Rough Country ignores those trucks. The brand's Ford and Ram kits already appear as picks in our vehicle guides, and this guide only lists kits whose Amazon listing, part number, fitment and product image all verified without duplicating a kit already published elsewhere on the site. The Ram 2500 5-inch gas kit (36420) was fully verified except for one thing — no fetched source exposed its Amazon ASIN — so it is named in the left-out section below rather than published as a pick.
Do Rough Country kits fit factory-lifted trims like the ZR2, Trail Boss and PRO-4X?
Usually not, and the cards say so per kit. The Colorado 6-inch kit excludes the ZR2 (2-inch factory lift, Multimatic DSSV dampers) and the Trail Boss (1-inch factory lift). The Titan 3-inch kit excludes the PRO-4X, which carries a factory lift, and the Titan XD, which is a different platform. If your truck left the factory lifted, check the exclusion line before anything else.
When the retailer and Rough Country disagree, which figure wins?
The manufacturer, every time. In this guide's research, one dealer page claimed Titan XD fitment that Rough Country excludes, and one retailer listed a 35-inch max tire for the Colorado kit where Rough Country's own specification is 285/65R18. Both cards follow the manufacturer figure and flag the conflict.
Will I need an alignment after installing one of these kits?
Yes. Every lift or leveling kit on this page changes ride height and therefore alignment angles; a professional alignment after install is part of the job, not an optional extra. Budget it alongside the kit — and alongside the follow-on parts some kits name, such as aftermarket wheels on the Colorado or a possible slip yoke eliminator on the TJ.
Related buying guides
Toyota Tundra
2 Best Leveling & Lift Kits for Toyota Tundra
Best Tundra leveling and lift kits by generation: verified picks for the 2007–2021 leaf-spring truck and the 2022+ coil-rear platform, with exclusions.
2 verified picks
Ram 1500
2 Best Leveling Kits for Ram 1500
Ram 1500 (DT) leveling kits split by one question — coil springs or factory air suspension? Two Amazon-sold, manufacturer-verified kits — one for each catalogue.
2 verified picks
Jeep Wrangler
2 Best Lift Kits for Jeep Wrangler JL
Best Jeep Wrangler JL lift kits: two Amazon-sold picks — Mopar's factory 2-inch lift and Rough Country's budget coil kit — plus the verified systems left out.
2 verified picks
Chevrolet / GMC Colorado / Canyon
3 Best Leveling & Lift Kits for Chevrolet Colorado & GMC Canyon
Best Colorado and Canyon leveling and lift kits by generation: verified picks for 2015–2022 and the factory-lift-heavy 2023+ trucks, with ZR2/AT4X exclusions.
3 verified picks
Not fitting it yourself? Budget the install and the alignment with our lift kit cost guide, then find a shop in our verified installer directory.